Mã lỗi 13.B2.DD — HP LaserJet Enterprise MFP M630
Code:
Tất cả lỗi (185)
10.00.00
10.00.10
10.23.5X
10.23.70
10.XX.33
10.XX.34
10.XX.40
10.XX.41
10.XX.70
10.YY.15
10.YY.35
11.00.01
11.00.02
13.80.Ax
13.84.A4
13.85.Ax
13.A1.D1
13.A1.FF
13.A2.A2
13.A2.D2
13.A2.FF
13.A3.A3
13.A3.D3
13.A3.FF
13.A4.A4
13.A4.D4
13.A4.FF
13.A5.A5
13.A5.D5
13.A5.FF
13.AA.EE
13.Ax.EE
13.B2.Az
13.B2.Bz
13.B2.DD
13.B2.Dz
13.B2.FF
13.B9.Az
13.B9.Bz
13.B9.Dz
13.B9.FF
13.C3.Az
13.C3.Dz
13.D3.Dz
13.FF.FF
13.XX
20.00.00
21.00.00
30.01.01
30.01.06
30.01.08
30.01.14
30.01.15
30.01.18
30.01.19
30.01.30
30.01.32
30.01.36
30.01.41
30.01.42
30.01.43
30.01.44
30.01.45
30.01.46
30.01.48
30.01.49
30.01.50
30.03.14
30.03.20
30.03.22
30.03.23
30.03.30
30.03.45
31.01.47
31.03.14
31.03.20
31.03.22
31.03.30
31.03.31
31.03.32
31.03.33
31.03.34
31.13.00
31.13.01
31.13.02
31.13.13
31.13.14
31.13.15
33.01.XX
33.02.01
33.03.03
33.03.XX
40.00.01
40.00.02
40.00.03
40.00.04
40.00.05
40.08.0X
40.0X.05
41.01.YZ
41.02.00
41.03.FZ
41.03.YZ
41.04.YZ
41.05.YZ
41.XX.YZ
42.XX.YZ
44.01.XX
44.03.XX
44.10.XX
44.34.XX
44.92.XX
47.00.XX
47.01.XX
47.02.XX
47.03.XX
47.04.XX
47.05.00
47.06.XX
47.WX.YZ
48.XX.YY
49.XX.YY
50.WX.YZ
51.00.10
51.00.19
51.00.20
52.00.0
52.00.20
54.00.03
54.06.21
55.00.01
55.00.03
55.00.04
55.00.05
55.01.06
55.02.06
56.00.01
56.00.YY
57.00.01
57.00.02
57.00.03
57.00.05
57.00.06
57.00.07
57.XX.YZ
58.00.02
58.00.03
58.00.04
58.01.04
58.02.04
59.00.00
59.00.10
59.00.30
59.00.40
59.05.50
59.05.60
59.A2.02
59.A3.03
59.A4.04
59.A5.05
60.00.02
60.00.03
60.00.04
60.00.05
62.00.00
65.80.A0
65.80.A1
66.00.20
66.00.40
66.00.50
66.00.77
66.00.79
66.80.YY
70.00.00
80.0X.YY
82.73.46
82.73.47
98.00.01
98.00.02
98.00.03
98.00.04
98.01.00
99.00.01
99.00.02
99.XX.YY
Code:
13.B2.DD
Display: 13.B2.DD Jam in duplexer
Description: Paper Delay Jam at Registration Top This is a paper delay jam at registration sensor PS103 from the duplexer re-feed.
Remedy: 1. Open top cover and right door and inspect the paper path and ensure no paper blocking the paper path. 2. Make sure that the tray width and length guides are set to the correct paper size being installed into the tray and that the tray is not over filled above fill mark on tray. 3. Verify that the media meets HP media specifications. 4. Remove the duplexer and remove any media or obstructions found. 5. If issue remains, replace the duplexer
← Xem tất cả mã lỗi HP LaserJet Enterprise MFP M630