Code: 30.01.42
Display: 30.01.42 Scanner error
Description: Internal product communication error.
Remedy: 1. Turn the product off, and then on again. 2. If the error persists, turn the product off, and then check the scanner control board (SCB) connectors. 3. If this error occurs after a formatter, fax card or hard disk has been replaced, check that the formatter is fully seated and the connectivity LED (smile face icon on the formatter) is illuminated. Check the fax card for proper seating on the formatter. (If fax card is not properly seated it can prevent the formatter from seating properly in the product.. 4. If the error persists, replace the scanner control board (SCB).