Code: 18
Display: Jam in cartridge area
Description: The product has detected a paper jam in the print cartridge area.
Remedy: 1. Clear the jam from the area indicated in the message, and then follow the control panel instructions. 2. If the error persists, clean the fuser inlet guide. If the inlet guide is scratched, replace the fuser. 3. If the error persists, check the sensor lever in the fuser inlet area. 4. If the sensor lever is stuck, clean it, and then make sure it moves smoothly. 5. If the sensor lever is broken or missing, replace the fuser. 6. If the error persists, reconnect J552 on the engine controller PCA. 7. If the error persists, replace the fuser.