Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 68.X — HP LaserJet M3027 MFP

Code: 68.X

Display: 68.X Storage error settings changed To continue touch OK
Description: One or more device settings in NVRAM are invalid and have been reset to the factorydefault settings. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.
Remedy: 1. Touch OK to clear the message. If the message is not cleared, turn the device off, and then turn the device on. 2. Check the device settings to determine which settings have changed. 3. Perform an NVRAM initialization. Make sure that you read and understand the caution and the note in that section. 4. If, after performing an NVRAM initialization, the message persists, replace the formatter

← Xem tất cả mã lỗi HP LaserJet M3027 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie