Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 50.3 — HP LaserJet M3035 MFP

Code: 50.3

Display: 50.X FUSER ERROR To continue turn off then on
Description: A fuser error has occurred.
Fuser over-temperature
Remedy: 1. Turn the device off, and then turn the device on. 2. If the message persists, turn off the device to allow the fuser to cool. 3. Verify that the correct model fuser is installed in the device. 4. Check the cable connections between the ECU and the fuser. 5. If, after checking the cables, the message persists, replace the fuser. 6. If, after replacing the fuser, the message persists, replace the ECU. 7. If, after replacing the ECU, the message persists, replace the high-voltage power-supply

← Xem tất cả mã lỗi HP LaserJet M3035 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie