Code: 68.X
Display: 68.X Permanent storage full To continue touch OK
68.X Permanent storage write fail To continue touch OK
68.X Permanent storage write fail To continue touch OK
Description: The device NVRAM is full or the storage device is failing to write. Some settings saved in the NVRAM might have been reset to the factory defaults. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage. X description 0 onboard NVRAM 1 disk drive
Remedy: Touch OK to clear the message. If the message is not cleared, turn the device off, and then turn the device on. 68.0, onboard NVRAM 1. If the message persists, perform an NVRAM initialization. Make sure that you read and understand the caution and the note in that section. 2. If, after performing an NVRAM init, the message persists, replace the formatter
68.1, disk drive 1. Use the HP Web Jetadmin software to delete files from the disk drive. 2. If, after deleting files from the disk drive, the message persists, reinitialize the disk drive. Make sure that you read and understand the caution and the note in that section. 3. If, after reinitializing the disk drive, the message persists, replace the disk drive
68.1, disk drive 1. Use the HP Web Jetadmin software to delete files from the disk drive. 2. If, after deleting files from the disk drive, the message persists, reinitialize the disk drive. Make sure that you read and understand the caution and the note in that section. 3. If, after reinitializing the disk drive, the message persists, replace the disk drive