Description: The document feeder output bin holds 50 sheets of paper. The MFP stops when the bin is full.
Remedy: Usually, emptying the ADF output bin clears this message. If the message persists, check the following items: 1. Verify that the ADF output-bin-full sensor flag can move freely. 2. Verify that the connector at the sensor flag is seated correctly. You can use the scanner tests (Troubleshooting > Scanner Tests) to test this sensor. Lift up on the sensor flag to simulate the output bin being full. Observe whether the status changes on the controlpanel display. If the status does not change, make sure that the connectors are firmly seated. Clean or replace the sensor if necessary.