Code: -
Display: Reattach output bin
Description: The standard output bin was detached when the MFP was turned on, or the cable on the stapler/stacker or the 3-bin mailbox is not connected to the MFP.
Remedy: Turn the MFP off. If you are using the stapler/stacker or the 3-bin mailbox, make sure that the cable is connected to the MFP. Reattach the output bin, and then turn the MFP on. Observe the LED on the output device. If the message persists, verify that connector J65 on the DC controller is firmly seated. Replace SW103 if necessary.