Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi - — HP LaserJet M4345 MFP

Code: -

Display: Tray <XX> Open
Description: The tray 2 paper-size-detection switch, SW102, has detected that tray 2 is not installed or that no media is present.
Remedy: 1. Verify that connector J90 on the DC controller is firmly seated. 2. You can use the Manual Sensor Test (Troubleshooting > Manual Sensor Test to test the operation of this switch. Status “S5” indicates that lettersize media is installed in the tray. Status “S3” indicates that A4-size media is installed in the tray. Status “S7” indicates that the tray is not installed in the MFP. Pull the tray out and reinsert it while you observe the status on the control-panel display. If the status does not change, replace SW102.

← Xem tất cả mã lỗi HP LaserJet M4345 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie