Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.12.11 — HP LaserJet M4345 MFP

Code: 13.12.11

Display: 13.JJ.NT JAM IN OUTPUT BIN
Description: Media is jammed in the output bin.
Media is present in the output bin when the MFP is turned on.
Remedy: 1. Clear all jammed media. 2. Verify that connector J50 on the DC controller PCA is firmly seated. 3. Verify that the two connectors that are on the rear of the reversing assembly are installed. 4. Use the component diagnostic test to test three motors: switchback motor, intermediate switchback motor, output motor. 5. Use the component diagnostic test to test two solenoids: face-up/face-down solenoid (SL105) and alienation solenoid (SL106). 6. Use the manual sensor test to test two sensors: paper-delivery sensor PS109 (sensor “K”) and reversing-paper sensor PS110 (sensor “H”). 7. If any of these components fail, replace the reversing assembly.

← Xem tất cả mã lỗi HP LaserJet M4345 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie