Code: 7000
Display: Jam Inside 1 Open the Scanner Cover and Top Cover, pull out the Drum Unit and remove the jammed paper, then press Start.
Description: The eject sensor does not detect paper pass after the paper printing position sensor detected the paper pass.
Remedy: • Remove the jammed paper. • Check that the paper is set in the paper tray correctly. • Check that there is not too much paper set in the paper tray. • Flip over the paper in the paper tray or rotate the paper 180 degrees. • Check that the thickness of the paper is within the standard. • Flip through the paper and reset it in the paper tray.
1 Foreign object inside the machine Remove the foreign object. 2 Eject actuator coming off or caught in sections of the machine Reattach the eject actuator. 3 Connection failure of the paper feed/paper printing position sensor PCB harness Reconnect the paper feed/paper printing position sensor PCB harness. 4 Connection failure of the eject sensor PCB harness Reconnect the eject sensor PCB harness. 5 Paper feed/paper printing position sensor PCB failure Replace the paper feed/paper printing position sensor PCB ASSY. 6 Eject sensor failure Replace the eject sensor PCB ASSY. 7 Main PCB failure Replace the main PCB ASSY.
1 Foreign object inside the machine Remove the foreign object. 2 Eject actuator coming off or caught in sections of the machine Reattach the eject actuator. 3 Connection failure of the paper feed/paper printing position sensor PCB harness Reconnect the paper feed/paper printing position sensor PCB harness. 4 Connection failure of the eject sensor PCB harness Reconnect the eject sensor PCB harness. 5 Paper feed/paper printing position sensor PCB failure Replace the paper feed/paper printing position sensor PCB ASSY. 6 Eject sensor failure Replace the eject sensor PCB ASSY. 7 Main PCB failure Replace the main PCB ASSY.