Description: Input delay between Tray 1 and SR5 (top/ registration sensor). Picked from Tray 1. Picked from Tray 1 but did not read SR5.
Remedy: Clear the jam 1. Check to see that the media in Tray 1 is loaded correctly and that the size guides are set appropriately. 2. Check Tray 1 pick roller and separation pad for excessive wear or contamination. Replace if necessary. 3. Check for paper or other obstructions to the paper path in Tray 1, in the cartridge door area, and before the registration area. Replace the cartridge door assembly if problems are detected. 4. Check SR5 (top/registration sensor) and flag for correct mechanical functionality. repair or replace if necessary. 5. For SR5, check connector J319 on the dc controller. 6. Replace the HVPS (only if SR5 is suspected). 7. Replace the dc controller.