Code: 13.01.00
Display: 13.01.00 Jam inside middle right door
Description: Input delay between HCI SR3 (Tray 4 feeddetect sensor) and SR5 (top/registration sensor) Leading edge passed HCI SR3 (Tray 4 feeddetect sensor). NOTE This message can occur for media picked from Tray 4, Tray 5, or Tray 6. NOTE This error can also be cause by a mispick in Tray 3.
Remedy: Clear the jam 1. Check for paper or other obstructions to the paper path between the output of the HCI and the registration area. 2. Check SR5 (top/registration sensor) and SR14 (pre-feed sensor) for correct mechanical functionality. Repair or replace if necessary. 3. Check connector J319 and J320 on the dc controller. 4. Replace the HVPS (only if SR5 is suspected). 5. Replace the dc controller.