Description: The page did not reach SR6 (fuser-delivery sensor) when it should have.
Remedy: Clear the jam. 1. Check for paper or other obstructions to the paper path in the fuser and between the fuser and the registration area. 2. Check for paper in the fuser and for any damage to the fuser or its connections to the print engine. Replace the fuser if necessary. 3. Check SR6 (fuser-output sensor) for correct mechanical functionality. Replace if necessary. 4. Check SR4 (loop sensor) and SR5 (top/ registration sensor) for correct mechanical functionality. Repair or replace flags if necessary. NOTE The sensors are part of the HVPS. 5. Check connector J319 on the dc controller. 6. Replace the dc controller.