Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.30.00 — HP LaserJet M5025 MFP

Code: 13.30.00

Display: 13.30.00 Jam in Tray 4
Description: The leading edge of media from Tray 4 did not pass SR3 (Tray 4 feed-detect sensor). This is a mispick in Tray 4.
Remedy: 1. Clear the jam. 2. Check for paper or other obstructions in the HCI between Tray 4 and SR3. 3. Check Tray 4 pick and separation rollers for contamination and correct mechanical functionality. Replace if necessary. 4. Check HCI SR3 (Tray 4 feed-detect sensor) and flag for correct mechanical functionality. Repair or replace if necessary. 5. Check connector J1506 on the HCI control board in Tray 4. 6. Check connector J312 on the dc controller. 7. Replace the HCI control board in Tray 4 8. Replace the dc controller.

← Xem tất cả mã lỗi HP LaserJet M5025 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie