Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.01.00 — HP LaserJet M5035 MFP

Code: 13.01.00

Display: 13.01.00 Jam inside middle right door
Description: Input delay between SR14 (pre-feed sensor) and SR5 (top/registration sensor). Picked from Tray 3. Leading edge passed SR14, but did not reach SR5. This message can also indicate a no-pick in Tray 3.
Remedy: Clear the jam 1. Check for paper or other obstructions in Tray 3 and the paper path between Tray 3 and the registration area. 2. Check the Tray 3 pick and separation rollers for excessive wear or contamination. Replace if necessary. 3. Check SR5 (top/registration sensor) and SR14 (pre-feed sensor) and flags for correct mechanical functionality. Repair or replace if necessary. 4. For SR5, check connector J319 on the dc controller. 5. For SR14, check connector J320 on the dc controller. 6. Replace the HVPS (only if SR5 is suspected). 7. Replace the dc controller.

← Xem tất cả mã lỗi HP LaserJet M5035 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie