Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.01.00 — HP LaserJet M5035 MFP

Code: 13.01.00

Display: 13.01.00 Jam inside middle right door
Description: Input delay between HCI SR3 (Tray 4 feeddetect sensor) and SR5 (top/registration sensor) Leading edge passed HCI SR3 (Tray 4 feeddetect sensor). NOTE This message can occur for media picked from Tray 4, Tray 5, or Tray 6. NOTE This error can also be cause by a mispick in Tray 3.
Remedy: Clear the jam 1. Check for paper or other obstructions to the paper path between the output of the HCI and the registration area. 2. Check SR5 (top/registration sensor) and SR14 (pre-feed sensor) for correct mechanical functionality. Repair or replace if necessary. 3. Check connector J319 and J320 on the dc controller. 4. Replace the HVPS (only if SR5 is suspected). 5. Replace the dc controller.

← Xem tất cả mã lỗi HP LaserJet M5035 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie