Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.12.38 — HP LaserJet M5035 MFP

Code: 13.12.38

Display: 13.12.38 Jam inside upper left door
Description: Delay jam at SR2103 (stapler/stacker delivery sensor). Media did not arrive at SR2103 within the expected time. SR2103 is located in the paper path of the stapler/stacker at the exit rollers to the stacker-output bin. SR2103 is the exit sensor for the stapler/ stacker and senses media-presence as media exits the stapler/stacker into the stacker-output bin.
Remedy: 1. Open the upper left door and perform the following tasks: - Remove any paper or obstructions in the paper path. - Press down on the upper portion of the green guide and remove any media from between the green guide and the stapler/stacker exit rollers. 2. Make sure that the upper left door is mounted correctly at the bottom and that it closes securely at the top. If the door does not close correctly or if it shows signs of wear, replace the door. 3. Check the connection J2109 on the stapler/stacker control board. 4. Open the upper left door and observe the location of media in the paper path. - If the media stopped at the set of rollers located near the bottom of the left side door, replace the stapler/stacker feed assembly. - If the media stopped past the green guide, replace the stapler/stacker alighment unit.

← Xem tất cả mã lỗi HP LaserJet M5035 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie