Description: The leading edge of media from Tray 4 did not pass SR3 (Tray 4 feed-detect sensor). This is a mispick in Tray 4.
Remedy: 1. Clear the jam. 2. Check for paper or other obstructions in the HCI between Tray 4 and SR3. 3. Check Tray 4 pick and separation rollers for contamination and correct mechanical functionality. Replace if necessary. 4. Check HCI SR3 (Tray 4 feed-detect sensor) and flag for correct mechanical functionality. Repair or replace if necessary. 5. Check connector J1506 on the HCI control board in Tray 4. 6. Check connector J312 on the dc controller. 7. Replace the HCI control board in Tray 4 8. Replace the dc controller.