Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.30.00 — HP LaserJet M5035 MFP

Code: 13.30.00

Display: 13.30.00 Jam inside lower right door
Description: The leading edge of media from Tray 5 passed SR4 (Tray 5 feed-detect sensor) but did not pass SR3 (Tray 4 feed-detect sensor). -Or- The leading edge of media from Tray 6 passed SR9 (Tray 6 feed-detect sensor) but did not pass SR3 (Tray 4 feed-detect sensor).
Remedy: 1. Clear the jam. 2. Check for paper or other obstructions in the HCI between Tray 6 and SR3. 3. Check HCI sensors SR3, SR4, and SR9 and repair or replace them if necessary. 4. Check connector J1506 on the HCI control board of the tray in use at the time of the jam. 5. Check connector J312 on the dc controller. 6. Replace the HCI control board of the tray in use at the time of the jam. 7. Replace the dc controller.

← Xem tất cả mã lỗi HP LaserJet M5035 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie