Description: SR6 (fuser-exit sensor) did not detect media within the specified time after SR5 (top/ registration sensor) detected the leading edge.
Remedy: 1. Clear the jam. 2. Remove the fuser and check for media at the input and output sides of the fuser. 3. Check for paper or other obstructions in the paper path after the fuser. 4. Check SR6 (fuser-output sensor) for correct mechanical functionality. Replace if necessary. 5. Check connectors J903, J901, and J902 on the HVPS. 6. Check connector J318 and J319 on the dc controller. 7. Replace the fuser. 8. Replace the dc controller.