Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 7000 — Brother MFC1815

Code: 7000

Display: Jam Inside 1 Open the Scanner Cover and Top Cover, pull out the Drum Unit and remove the jammed paper, then press Start.
Description: The eject sensor does not detect paper pass after the paper printing position sensor detected the paper pass.
Remedy: • Remove the jammed paper. • Check that the paper is set in the paper tray correctly. • Check that there is not too much paper set in the paper tray. • Flip over the paper in the paper tray or rotate the paper 180 degrees. • Check that the thickness of the paper is within the standard. • Flip through the paper and reset it in the paper tray.
1 Foreign object inside the machine Remove the foreign object. 2 Eject actuator coming off or caught in sections of the machine Reattach the eject actuator. 3 Connection failure of the paper feed/paper printing position sensor PCB harness Reconnect the paper feed/paper printing position sensor PCB harness. 4 Connection failure of the eject sensor PCB harness Reconnect the eject sensor PCB harness. 5 Paper feed/paper printing position sensor PCB failure Replace the paper feed/paper printing position sensor PCB ASSY. 6 Eject sensor failure Replace the eject sensor PCB ASSY. 7 Main PCB failure Replace the main PCB ASSY.

← Xem tất cả mã lỗi Brother MFC1815

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie