Mã lỗi 41.03.YZ — HP LaserJet M577c Enterprise Color MFP
Code:
41.03.YZ
Display: 41.03.YZ Unexpected size in tray <X>
Description: The printer detected a different paper size than expected.
Remedy: 1. Touch OK to use another tray. 2. Print a configuration page to verify the size and type to which the trays are set. 3. Make sure that the tray is loaded with the correct paper size and that the sliding paper guides are correctly adjusted to the correct paper size. 4. Verify that the error is not occurring as a result of an unexpected paper size trigger caused by a multipage feed. 5. Verify that the Toner cartridge and the transfer roller are seated properly. 6. Use the Tray/Bin manual sensor test to verify that the cassette media switch is correctly functioning. 7. Check paper path sensors SR6 and SR9 for proper operation and that they do not stick at all. Replace any damaged sensor or assembly. 8. Check paper width sensors SR13 and SR14 for proper operation and that they do not stick at all. Replace any damaged sensor or assembly. 9. Reconnect the connectors for the media sensor, intermediate-transfer belt, and the DC controller PCA. NOTE: • SR6 Top Sensor connects to DCC on J118. • SR9 Fuser Delivery sensor connects to Fuser PCA on J2603 then to interconnect J50 then to DCC on J116. • SR13 and SR14 Media Width sensors connect to DCC on J118. 10. Test registration assembly motor and clutch. If not function properly replace the registration assembly. If the error persists, replace the lifter assembly.