Mã lỗi 50.2X.YZ — HP LaserJet M577z Enterprise Color MFP
Code:
50.2X.YZ
Display: 50.2X.YZ
Description: Fuser warm-up error
Remedy: action1. Remove and reinstall the fuser. Make sure that it is seated correctly.2. Make sure that there is no residual paper in the fuser.3. Check the printer power source. Make sure that the power source meets printer requirements. Make sure that the printer is the only device using the circuit.4. Check the connector (J50) between the fuser and printer. If the connector is damaged, replace the connector assembly or the Fuser5. Reconnect the connector (J128) on the DC controller PCA, connector (J600) on the low voltage power supply assembly and the connectors (J6002 and J6003) on the fuser power supply assembly6. If the issue persists, replace the fuser.7. If error still remains, replace the fuser power supply assembly. Fuser Power Supply assembly Part number: RM2-7125-000CN 8. Replace the low-voltage power assembly.