Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B9.Bz — HP LaserJet M630dn Enterprise MFP

Code: 13.B9.Bz

Display: 13.B9.Bz Jam in fuser
Description: This jam occurs when a near complete overlap (less than 5 to 15 mm of non-overlap) multi-feed jam is detected. • 13.B9.B1 Multi-Feed jam is detected when printing from Tray 1. • 13.B9.B2 Multi-Feed jam is detected when printing from Tray 2. • 13.B9.B3 Multi-Feed jam is detected when printing from Tray 3. • 13.B9.B4 Multi-Feed jam is detected when printing from Tray 4. • 13.B9.B5 Multi-Feed jam is detected when printing from Tray 5.
Remedy: 1. Remove any jammed paper from the device. 2. Make sure paper meets HP specifications and is loaded in trays correctly. 3. Make sure that the tray width and length guides are set to the correct paper size being installed into the tray and that the tray is not over filled above fill mark on tray. 4. Verify that the tray pickup, feed, and separation rollers are correctly installed and that they are not worn or damaged. 5. Clean or replace the pickup/feed rollers as needed

← Xem tất cả mã lỗi HP LaserJet M630dn Enterprise MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie