Code: 31.13.00
Display: 31.13.00 Document feeder multi-pick error
Description: A multiple pick error was reported by the document feeder assembly.
Remedy: 1. Open the document feeder cover, pull all the sheets back into the tray and then resume the job. 2. Verify that the paper meets the product specifications. 3. Make sure that the input tray is not overloaded and the tray guides are properly aligned to both edges of the paper. 4. Check and clean the rollers and separation pad, and test the registration sensor. If needed, replace pickup roller assembly, separation pad. 5. Verify that the motor cables are connected. 6. Re-seat the document feeder to the scanner control board (SCB). 7. Replace the document feeder.