Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.A5.FF — HP LaserJet M630f Enterprise MFP

Code: 13.A5.FF

Display: 13.A5.FF Paper Jam
Description: Residual paper jam in Tray 5. This jam occurs when residual paper is detected at the Tray 5 feed sensor (SR12) at power on.
Remedy: 1. Open the tray, and right door and remove any jammed paper, and then close the tray. 2. Open and close any door on the product to allow the product to attempt to clear the jam. 3. Make sure that the tray width and length guides are set to the correct paper size being installed into the tray and that the tray is not over filled above fill mark on tray. 4. Verify that the Tray 5 pickup, feed, and separation rollers are correctly installed and that they are not worn or damaged. Clean or replace the rollers as needed. 5. Use the manual sensor tests to toggle SR12. If the sensor is not functioning properly, replace the Tray 5 pick up assembly. 6. Check the connectors for Tray 5 on the HCI controller and assembly (J32, J403 Media feed sensor) (J30, J403 Pick up assembly) 7. If the error persists, replace the Tray 5 paper pickup assembly.

← Xem tất cả mã lỗi HP LaserJet M630f Enterprise MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie