Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 60.00.04 — HP LaserJet M630f Enterprise MFP

Code: 60.00.04

Display: 60.00.04 Tray 4 lifting error
Description: Tray 4 lifting error. Tray 4 did not raise to the paper surface sensor in the required amount of time.
Remedy: 1. Remove the tray and manually rotate the gear on the rear of the tray to make sure that the lift mechanism is working. 2. With the tray removed, pressing any of the paper size switches will cause the tray lift motor to run. If the motor does not work, replace the lifter assembly. 3. Use the Tray/Bin manual sensor test to verify that the Tray 3 paper (SR5 and SR6) surface sensors are properly functioning. 4. If this part has been removed or replace, check the connector (1604 and 1605) on the on the paper feeder controller PCA. 5. If the error persists, replace the lifter drive assembly (Tray 4).

← Xem tất cả mã lỗi HP LaserJet M630f Enterprise MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie