Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B2.FF — HP LaserJet M630h Enterprise MFP

Code: 13.B2.FF

Display: 13.B2.FF Paper Jam
Description: Residual paper jam in the registration area. This jam occurs when residual paper is detected at the registration sensor (PS103) at power on.
Remedy: 1. Open the top cover and clear the jam in the indicated area. Inspect the paper path and make sure no paper is blocking the paper path. 2. Make sure that the tray width and length guides are set to the correct paper size being installed into the tray and that the tray is not over filled above fill mark on tray. 3. Test printer from other trays to verify functionality and if issue is specific to a one specific tray. 4. Try flossing the printer through the jam access door. • Place paper in access door. • Turn off then back on printer. • Watch for Page to be pulled into printer and fed through paper path. 5. Verify if print job was being duplexed. 6. Check if the pre-registration roller is dirty, worn or deformed. Clean the pre-registration roller if dirty. Replace the roller if it is worn or deformed. 7. Check the registration assembly. Verify the spring of the registration is in correct position. Replace the registration assembly if the registration shutter is scarred or worn. 8. Check and reconnect the connector (J94) on the DC controller PCA.

← Xem tất cả mã lỗi HP LaserJet M630h Enterprise MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie