Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B9.Az — HP LaserJet M630z Enterprise MFP

Code: 13.B9.Az

Display: 13.B9.Az Fuser Jam
Description: Fuser delivery stay. This jam occurs when the fuser delivery sensor (PS700) does not detect the trailing edge of the paper within a specified period of time from when the sensor detected the leading edge.This jam code might be caused by: • An accordion jam at the fuser exit, something blocking the paper before the output rollers. • The output bin rollers not turning, there is very little distance from the fuser exit and the output bin • A sticky fuser exit flag, if it stuck or even delayed momentarily in the activated position. • Issues with the duplexer . Error occusr only on Duplex jobs, Simplex jobs will print OK. • 13.B9.A1 The fuser is printing in Auto-Sense mode Normal. • 13.B9.A2 The fuser is printing in fuser mode Normal. • 13.B9.A3 The fuser is printing in fuser mode Light 1 or Light 2. • 13.B9.A4 The fuser is printing in fuser mode Heavy 1. • 13.B9.A5 The fuser is printing in fuser mode Heavy 2. • 13.B9.A6 The fuser is printing in fuser mode Heavy 3. • 13.B9.A7 The fuser is printing in fuser mode Glossy media 1. • 13.B9.A8 The fuser is printing in fuser mode Glossy media 2 • 13.B9.A9 The fuser is printing in fuser mode Glossy media 3. • 13.B9.AB The fuser is printing in fuser mode Transparency. • 13.B9.AC The fuser is printing in fuser mode Label. • 13.B9.AD The fuser is printing in fuser mode Envelope 1 or Envelope 2. I
Remedy: 1. Open the output door, and then clear any jammed paper. 2. Remove any jammed paper from the device. Thoroughly inspect the area the jam occurred and clear all paper from the paper path. 3. Make sure that the paper meets HP specifications. 4. Ensure the Toner Cartridge and Transfer Roller are seated properly. 5. Remove the fuser, and then clear any jammed paper. 6. Verify there is no debris from a previous jam stuck in the fuser or rollers leading into or exiting the fuser. 7. Verify that the fuser exit flag (PS700) moves freely and is not damaged. 8. Run the sensor test and confirm the fuser exit flag is functioning properly. 9. Replace the fuser.

← Xem tất cả mã lỗi HP LaserJet M630z Enterprise MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie