Code: 60.00.05
Display: 60.00.05 Tray 5 lifting error
Description: Tray 5 lifting error. Tray 5 did not raise to the paper surface sensor in the required amount of time.
Remedy: 1. Remove the tray and manually rotate the gear on the rear of the tray to make sure that the lift mechanism is working. 2. With the tray removed, pressing any of the paper size switches will cause the tray lift motor to run. If the motor does not work, replace the lifter assembly. 3. Use the Tray/Bin manual sensor test to verify that the Tray 3 paper (SR8 and SR9) surface sensors are properly functioning. 4. If this part has been removed or replace, check the connector (1601 and 1602) on the on the paper feeder controller PCA. 5. If the error persists, replace the lifter drive assembly (Tray 5).