Mã lỗi 66.00.77 — HP LaserJet M680z Enterprise Color MFP
Code:
66.00.77
Display: 66.00.77
Description: This is a device communication error. The communication between the print engine and the finisher has been interrupted or lost.
Remedy: 1. Make sure that the latest firmware updates are installed for the engine and the finisher. 2. Make sure that the finisher is grounded correctly. • Make sure that the finisher is latched and locked to the engine by tightening the thumbscrew inside the front door. • Make sure that the grounding-frame assembly (the bar with the wheel located between the engine and the finisher) is in the down position with the wheel touching the floor and that the grounding plate is not damaged. NOTE: The grounding-frame assembly is in the up position when the finisher is shipped. It must be lowered when the finisher is installed. 3. Make sure that the communication cable from the finisher to the engine is installed correctly. 4. Make sure that the connectors on the stacker controller PCA are fully seated and not damaged. 5. Only if the error persists and none of the previous steps correct the problem, replace the stacker controller PCA.