Code: 13.B2.D1
Display: 13.B2.D1 Jam in tray 1
Description: Paper stay jam at top/registration sensor from Tray 1. This jam occurs when the paper does not reach the TOP sensor (SR9) within the designated amount of time from Tray 1.
Remedy: 1. Remove any jammed paper from Tray 1, and then touch the OK button. 2. Check for obstructions in the paper path from Tray 1. 3. Check the pickup, feed, and separation rollers for Tray 1. Replace the rollers if they are worn or defective. 4. Make sure that the registration assembly shutter is properly functioning. Replace the registration assembly if necessary. 5. Use the Manual sensor tests to activate the pickup solenoid (listen for the solenoid to move) for Tray 1. If the solenoid is not properly functioning, replace the toner cartridge door. 6. Use the Manual sensor tests to toggle the TOP sensor (SR9). If the sensor is not properly functioning, replace the high-voltage power supply. 7. Inspect the connector (J62) on the DC controller PCA, and connector (J901) on the high-voltage power supply. 8. Use the Components tests to activate the drum motor (listen for the motor to rotate). If the motor is not properly functioning, replace the main drive assembly.