Code: 13.B9.CX
Display: 13.B9.CX Fuser wrap jam
Description: This jam occurs when the paper leaves the fuser output sensor (SR12) before a designated amount of time after the paper reached the fuser output sensor (the paper is wrapped around the fuser roller). X indicates the fuser mode - 2 = Normal - 3 = Light media 1 - 3 = Light media 2 - 4 = Heavy media 1 - 5 = Heavy media 2 - B = Transparency - D = Envelope 1 - D = Envelope 2
Remedy: 1. Remove the duplexer (if installed). Remove the left door, and then remove the fuser. Remove any jammed paper from the fuser, and then reinstall the fuser. NOTE: Remove any other jammed paper from the fuser area. Reinstall the left door, and duplexer (if removed). Close the left door. 2. Perform a cleaning page procedure to clean the fuser rollers. 3. Use the Manual sensor tests to toggle the fuser output sensor (SR12). If the sensor is not properly functioning, replace the fuser. 4. If the error persist, the fuser pressure roller might be damaged. Replace the fuser.