Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.D3.DX — HP LaserJet M725 Enterprise 700

Code: 13.D3.DX

Display: 13.D3.DX Jam in duplexer
Description: Late to duplex exit jam. This jam occurs when the leading edge of the paper reaches the duplex switchback sensor (SR1DU), but fails to reach the duplex reefed sensor (SR2DU)- The leading edge is in the duplexer, but the trailing edge might be accessible from the left door. X indicates the fuser mode - 2 = Normal - 3 = Light media 1 - 3 = Light media 2 - 4 = Heavy media 1 - 5 = Heavy media 2 - B = Transparency - D = Envelope 1 - D = Envelope 2
Remedy: 1. Remove the duplexer, remove any jammed paper, and then reinstall the duplexer. 2. Check the paper path and rollers at the fuser and duplexer for damage. Replace the fuser or duplexer if necessary. 3. Use the Manual sensor tests to toggle the duplexer refeed sensor (SR2DU). If the sensor or lever are not properly functioning, replace the duplexer. 4. Use the Components tests to activate the duplex refeed solenoid/clutch (listen for the solenoid to move). If the solenoid/clutch is not properly functioning, replace the duplexer.

← Xem tất cả mã lỗi HP LaserJet M725 Enterprise 700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie