Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.D3.FF — HP LaserJet M725 Enterprise 700

Code: 13.D3.FF

Display: 13.D3.FF Jam in top cover area
Description: Duplexer refeed sensor (SR2DU) jam. This jam occurs when paper exists at any of the paper path jam sensors when the product power is turned on or after jam re-evaluation.
Remedy: 1. Open the top cover, remove any jammed paper, and then close the top cover. 2. Remove the duplexer, remove any jammed paper, and then reinstall the duplexer. NOTE: Make sure that the duplexer is fully seated when reinstalled. 3. Use the Manual sensor tests to toggle the duplexer refeed sensor (SR2DU). If the sensor or lever are not properly functioning, replace the duplexer.

← Xem tất cả mã lỗi HP LaserJet M725 Enterprise 700

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie