Code: 88
Description: Recording paper jam. (Even after paper pulling-in operation, the registration sensor is still OFF.)
Causes:
Remedy: Jam clear cover not closed correctly Close the jam clear cover correctly. Registration sensor harness not connected correctly Correct the connection. Bank ASSY deformed Replace the bank ASSY. Paper pull-in rollers defective Replace the paper pull-in rollers. Mode switching lever (at the right end of CR guide rail) not sliding smoothly Clean the mode switching lever. At the ends of the paper feed roller shaft, any gear(s) damaged Replace the engine unit. Paper feed motor defective Main PCB defective Replace the main PCB.