Code: 13.A7.D5
Display: 13.A7.D5 Jam in lower right door
Description: This jam occurs when the leading edge passes the tray 5 feed sensor (PS3302), but does not reach the HCI exit sensor (PS3301) in the designated amount of time.
Remedy: 1x500 paper feeder and HCI. 1. Open the lower right door, remove any jammed paper, and then close the lower right door. 2. Inspect the Tray 5 pick, feed and separation rollers. Clean or replace them if necessary. 3. Inspect the connectors at the feed sensor and controller PCA. 4. Use the Tray/bin manual sensor tests to toggle the HCI exit sensor (PS3301). If the sensor or lever are not properly functioning, replace the HCI crossing assembly. 5. Use the Components tests to toggle the Tray 5 solenoid (listen for the solenoid to move). If the solenoid is not properly functioning, replace the Tray 5 paper pickup assembly. 6. Use the Components tests to activate the Tray 5 pickup motor (listen for the motor to rotate). If the motor is not properly functioning, replace the Tray 5 pickup motor.