Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B2.FF — HP LaserJet M725dn Enterprise 700 MFP

Code: 13.B2.FF

Display: 13.B2.FF Jam in top cover area
Description: TOP sensor (SR9) residual jam. This jam occurs when paper exists at any of the paper path jam sensors when the product power is turned on or after a jam re-evaluation.
Remedy: 1. Open the top cover, and then remove the toner cartridge. Remove any jammed paper, and then close the top cover. 2. Use the Manual sensor tests to toggle the TOP sensor (SR9). If the sensor is not properly functioning, replace the high-voltage power supply. 3. Inspect the connector (J62) on the DC controller PCA, and connector (J901) on the high-voltage power supply.

← Xem tất cả mã lỗi HP LaserJet M725dn Enterprise 700 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie