Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B2.AD — HP LaserJet M725f Enterprise 700 MFP

Code: 13.B2.AD

Display: 13.B2.AD Jam in top cover area
Description: Paper stay jam at top/registration sensor from the duplex path. This jam occurs when picking from duplex path and paper stays at TOP (registration) sensor (SR9).
Remedy: 1. Open the top cover, and then remove the toner cartridge. Remove any jammed paper, and then reinstall the toner cartridge. Close the top cover. 2. Make sure that the duplexer is seated properly and check for obstructions in the paper path. 3. Use the Components tests to activate the duplex feed motor (listen for the motor to rotate). If the motor is not properly functioning, replace the duplexer. 4. Make sure that the transfer roller is seated properly and not worn or deformed. Replace the transfer roller if necessary. 5. Make sure that the registration assembly shutter is properly functioning. Replace the registration assembly if necessary. 6. Check the toner cartridge for damage. Replace the cartridge if necessary. 7. Use the Manual sensor tests to toggle the TOP sensor (SR9). If the sensor is not properly functioning, replace the high-voltage power supply. 8. Inspect the connector (J62) on the DC controller PCA, and connector (J901) on the high-voltage power supply. 9. Use the Components tests to activate the drum motor (listen for the motor to rotate). If the motor is not properly functioning, replace the main drive assembly.

← Xem tất cả mã lỗi HP LaserJet M725f Enterprise 700 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie