Code: 13.B2.FF
Display: 13.B2.FF Jam in top cover area
Description: TOP sensor (SR9) residual jam. This jam occurs when paper exists at any of the paper path jam sensors when the product power is turned on or after a jam re-evaluation.
Remedy: 1. Open the top cover, and then remove the toner cartridge. Remove any jammed paper, and then close the top cover. 2. Use the Manual sensor tests to toggle the TOP sensor (SR9). If the sensor is not properly functioning, replace the high-voltage power supply. 3. Inspect the connector (J62) on the DC controller PCA, and connector (J901) on the high-voltage power supply.