Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.WX.YZ — HP LaserJet M725f Enterprise 700 MFP

Code: 13.WX.YZ

Display: 13.WX.YZ Fuser area jam (top cover)
Description: Fuser delay jam from Tray 1-6. This jam occurs when the leading edge of the page does not reach the fuser output sensor (SR12) in designated amount of time. NOTE: In the event log, this error appears as 13.B9.DX. “X” indicates the source tray. Z indicates the source tray - 1 = Tray 1 - 2 = Tray 2 - 3 = Tray 3 - 4 = Tray 4 - 5 = Tray 5 - 6 = Tray 6
Remedy: 1. Open the left door to release fuser roller pressure. IMPORTANT: Do not attempt to remove the jammed paper. Open the top cover, and then remove the toner cartridge. Remove any jammed paper, and then reinstall the toner cartridge. Close the top cover and left door. 2. Check for obstructions in the paper path and rollers at the fuser for damage. Replace the fuser if necessary. 3. Use the Manual sensor tests to toggle the fuser output sensor (SR12). If the sensor is not properly functioning, replace the fuser. 4. Inspect the following connectors: - Fuser, J1 - Fuser motor, J1100 - DC controller, J6 and J47 - High-voltage power supply, J902 5. Use the Components tests to activate the fuser drive motor (listen for the motor to rotate). If the motor is not properly functioning, replace the fuser

← Xem tất cả mã lỗi HP LaserJet M725f Enterprise 700 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie