Mã lỗi 31.13.01 — HP LaserJet M725f Enterprise 700 MFP
Code:
31.13.01
Display: 31.13.01
Description: Paper pick was initiated, but the page didn't make it to the pick success sensor.
Remedy: 1. Open the ADF lid, pull sheets back into input tray, and resume the job. 2. Check the paper guides and make sure they are set to the correct paper width. 3. Make sure the input tray is not overloaded. 4. Check the document feeder page count for roller life. 5. Verify the paper meets the product specifications. 6. Make sure the ADF roller door is completely closed. 7. Check the event log for 31.03.30 errors, and resolve those errors first. 8. Clean the document feeder roller. 9. Open the following menus: - Administration - Troubleshooting - Diagnostic Tests - Scanner Tests Actuate the Pick-success Sensor. If the sensor does not show functionality when tested, replace the Document feeder.