Code: 13.A4.D4
Display: 13.A4.D4 Jam in lower right door
Description: This jam occurs when the leading edge passes the source tray feed sensor (PS3302), but does not reach the HCI exit feed sensor (PS3301) in the designated amount of time.
Remedy: 1. Open the lower right door, remove any jammed paper, and then close the lower right door. 2. For the following input device configurations: HCI only, do the following. a. Inspect the Tray 4 pick, feed and separation rollers. Clean or replace them if necessary. b. Check the connectors on the HCI controller PCA and the paper feed crossing assembly. c. Use the Tray/bin manual sensor tests to toggle the Tray 4 feed sensor. If the sensor or lever are not properly functioning, replace the HCI paper pickup assembly. d. Use the Components tests to toggle the Tray 4 solenoid (listen for the solenoid to move). If the solenoid is not properly functioning, replace the Tray 4 paper pickup assembly. e. Use the Components tests to activate the Tray 4 pickup motor (listen for the motor to rotate). If the motor is not properly functioning, replace the Tray 4 pickup motor.