Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.A4.D4 — HP LaserJet M725z Enterprise 700 MFP

Code: 13.A4.D4

Display: 13.A4.D4 Jam in tray 4
Description: No pick jam. This jam occurs when the paper does not reach the Tray 4 feed sensor (SR1PF) in the designated amount of time (for the following optional tray configurations). Optional Tray Configurations - 1x500 stackable only - 1x500 non-stackable only - 3x500 non-stackable only - HCI non-stackable only - 1x500 stackable + 1x500 non-stackable - 1x500 stackable + HCI non-stackable No pick jam- This jam occurs when the paper does not reach the Tray 4 feed sensor (PS3302) in the designated amount of time (HCI only optional tray configuration).
Remedy: 1. Open Tray 4, remove any jammed paper, and then close Tray 4. 2. For the following input device configurations: 1x500 paper feeder, 1x500 paper deck, 3x500 paper deck, 1x500 paper feeder with 1x500 paper deck, and 1x500 paper feeder with 3500 sheet HCI, HCI only; do the following. a. Inspect the Tray 4 pick, feed and separation rollers. Clean or replace them if necessary. b. Check the connectors at the feed sensor, solenoid, feed motor, and the controller PCA. c. Use the Tray/bin manual sensor tests to toggle the Tray 4 feed sensor. If the sensor is not properly functioning, replace the Tray 4 paper pickup assembly. d. Use the Components tests to activate the Tray 4 pickup motor (listen for the motor to rotate). If the motor is not properly functioning, replace the Tray 4 pickup motor.

← Xem tất cả mã lỗi HP LaserJet M725z Enterprise 700 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie