Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B9.AX — HP LaserJet M725z Enterprise 700 MFP

Code: 13.B9.AX

Display: 13.B9.AX Fuser area jam
Description: Fuser or duplexer stay jam- This jam occurs when the engine detects a paper stay jam at the fuser output sensor (SR12)- Most likely there is an accordion jam in the fuser exit path. X indicates the fuser mode - 2 = Normal - 3 = Light media 1 - 3 = Light media 2 - 4 = Heavy media 1 - 5 = Heavy media 2 - B = Transparency - D = Envelope 1 - D = Envelope 2
Remedy: 1. Open the left door, remove any jammed paper, and then close the left door. 2. Check the paper path and rollers at the fuser and at the paper delivery assembly for a blockage or damage. Replace the fuser or paper delivery assembly if necessary. 3. Use the Manual sensor tests to toggle the fuser output sensor (SR12) and the paper delivery output sensor (SR3). If a sensor is not properly functioning, replace the appropriate assembly. 4. Use the Components tests to activate the fuser drive motor and duplex feed motor (listen for the motor to rotate). If the motor is not functioning properly, replace the fuser motor or duplexer.

← Xem tất cả mã lỗi HP LaserJet M725z Enterprise 700 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie