Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B9.CX — HP LaserJet M725z Enterprise 700 MFP

Code: 13.B9.CX

Display: 13.B9.CX Fuser wrap jam
Description: This jam occurs when the paper leaves the fuser output sensor (SR12) before a designated amount of time after the paper reached the fuser output sensor (the paper is wrapped around the fuser roller). X indicates the fuser mode - 2 = Normal - 3 = Light media 1 - 3 = Light media 2 - 4 = Heavy media 1 - 5 = Heavy media 2 - B = Transparency - D = Envelope 1 - D = Envelope 2
Remedy: 1. Remove the duplexer (if installed). Remove the left door, and then remove the fuser. Remove any jammed paper from the fuser, and then reinstall the fuser. NOTE: Remove any other jammed paper from the fuser area. Reinstall the left door, and duplexer (if removed). Close the left door. 2. Perform a cleaning page procedure to clean the fuser rollers. 3. Use the Manual sensor tests to toggle the fuser output sensor (SR12). If the sensor is not properly functioning, replace the fuser. 4. If the error persist, the fuser pressure roller might be damaged. Replace the fuser.

← Xem tất cả mã lỗi HP LaserJet M725z Enterprise 700 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie