Code: 13.D3.FF
Display: 13.D3.FF Jam in top cover area
Description: Duplexer refeed sensor (SR2DU) jam. This jam occurs when paper exists at any of the paper path jam sensors when the product power is turned on or after jam re-evaluation.
Remedy: 1. Open the top cover, remove any jammed paper, and then close the top cover. 2. Remove the duplexer, remove any jammed paper, and then reinstall the duplexer. NOTE: Make sure that the duplexer is fully seated when reinstalled. 3. Use the Manual sensor tests to toggle the duplexer refeed sensor (SR2DU). If the sensor or lever are not properly functioning, replace the duplexer.