Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B9.FF — HP LaserJet M725z plus Enterprise 700 MFP

Code: 13.B9.FF

Display: 13.B9.FF Jam in left door
Description: Fuser exit sensor (SR12) residual jam. This jam occurs when paper exists at any of the paper path jam sensors when the product power is turned on or after jam re-evaluation.
Remedy: 1. Open the left door, remove any jammed paper, and then close the left door. 2. Inspect the connector (J1) on the fuser, connector (J61) on the DC controller PCA, and connector (J902) on the high-voltage power supply. 3. Use the Manual sensor tests to toggle the fuser exit sensor (SR12). If the sensor is not properly functioning, replace the fuser.

← Xem tất cả mã lỗi HP LaserJet M725z plus Enterprise 700 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie