Code: 50.BX.YZ
Display: 50.WX.YZ Fuser error To continue turn off then on
Description: High fuser temperature 3
The fuser has experienced an error. W = fuser error code, X = fuser mode, Y = previous printer sleep state, Z = next printer sleep state
Fuser modes: • Normal.Auto Sense • Normal • Light 1 • Heavy 1 • Heavy 2 • Heavy 3 • Glossy 1 • Glossy 2 • Glossy 3 • Glossy Film • Transparency • Label • Envelope 1 • Rough
Sleep states: • Standby level 1 (no temperature control) • Standby level 2 (high temperature control) • Standby level 3 (middle temperature control) • Standby level 2 (low temperature control) • Middle sleep • Deep sleep • Power off
The fuser has experienced an error. W = fuser error code, X = fuser mode, Y = previous printer sleep state, Z = next printer sleep state
Fuser modes: • Normal.Auto Sense • Normal • Light 1 • Heavy 1 • Heavy 2 • Heavy 3 • Glossy 1 • Glossy 2 • Glossy 3 • Glossy Film • Transparency • Label • Envelope 1 • Rough
Sleep states: • Standby level 1 (no temperature control) • Standby level 2 (high temperature control) • Standby level 3 (middle temperature control) • Standby level 2 (low temperature control) • Middle sleep • Deep sleep • Power off
Remedy: 1. Remove and then reseat the fuser. 2. Check the paper type setting using the product menus and in the printer driver. Making sure that they match and are correct for the type of media being used. 3. Replace the fuser. 4. Check the connector (J704) between the fuser and the printer. If it is damaged, replace the fuser drive assembly or fuser. 5. If this product has been previously serviced, check the connector (J131) on the DC controller PCA.